DELTA Compressed Air/Gas Filters

                 

                          

          

Home
Up
Pharmaceutical
Oil & Natural Gas
Clientele
Enquiry

 
bulletSub micron & Coalescing Oil Removal functionality
bulletFiltration down to 0.01 micron particle removal (99.99% efficiency)
bullet0.01 mg/M3 residual oil content in outlet air
bullet1/4" nB through 1" nB Models in Stainless Steel housings (Guaranteed for 5 years)
bulletVery low pressure drop (0.07 Bar Initial)
bulletLong cartridge life

DELTA Sub-Micron Oil Removal Filters guarantee technically oil and particle free air. With Borosilicate Glassfibre filter cartridges, residual oil content of less than 0.01 (or 0.1, 1, 2) mg/M3 in outlet and particle removal of 0.01(or 0.1, 1, 5) micron are offered. Silicone treated borosilicate glass fibre media cartridge with in built pre-filter and final filter layers. Reticulated foam layer for oil drainage tested to ASTM D2986:91. Poly Butylene Terphthalate (PBT) end caps.

Threaded Version (upto 1"nB)        Flanged Version( 1"nB and higher)

           

Residual Oil Content: 0.01, 0.1, 1, 2 mg/M3

Activated Carbon: 0.005 mg/M3

Initial DP: 0.07 Bar, Final DP: 0.7 Bar

Micron rating: 0.01 , 0.1 , 1, 5 micron particle removal (99.99% efficiency)

Housing Operating Pressure: 10 Bar(Std.), can be offered upto 400 Bar

Stainless Steel Housing:                           Carbon Steel Housing:

Size: 1/4", 3/8", 1/2", 3/4" and 1" BSP     Size: 1" to 4" flanged to ASTM A105(larger size on request)

Flow: 20 nM3/Hr to 200 nM3/Hr                Flow: 200 nM3/Hr

                                                               Shell: Carbon Steel ASTM A 106 Gr B

                                                  (Stainless Steel housings also available)

For a quote or more details: Click on Enquiry button on the left. Mention application, flow rate, pressure, micron rating, line size, and any other requirements.


Last modified: February 01, 2009